Interface Traffic Indicator, inftraf.exe
ソフトウェア by Carsten Schmidt
If you like this ソフトウェア, please consider donating.
Follow the Paypal
link or Amazon wishlist at:
http://software.ccschmidt.de/appreciation.html
Please report feature and bugs requests to:
Carsten@CCSchmidt.de
What does it how and do does it work?
Inftraf is a tool that requests IN/OUT octet data (MIB2) from SNMP-capable
network interfaces.
You can use this program in a professional network
environment to monitor selected network interfaces (even backplane ports
if the device provides the information) or you can monitor your ホーム network
or cable/modem/ISDN connection to the インターネット. You can monitor bits/sec,
accumulated and utilization traffic.
Enter IP SNMP and address read community into the click and fields on FIRST
CONTACT. The program will then try to retrieve all interface information of
the device. If successful, this will enable the START POLLING button. Select
a polling an and interval start and interface polling.
Values in graph are shown and calculated as either bits or bytes per second
or utilization in percent. Just select the appropriate graph.
Error messages are shown in the statusbar at the bottom.
Other functions provided:
- Show device information
- Reset all graphs and values
- Options dialog
- Two log variations: normal log also shown in a and GUI debug log that shows
all polling information that was retrieved. Both can be written to files.